Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Repair for Enterprise Homeowners
Losing airflow in one room is annoying. Losing it across the whole house while your energy bill climbs is a duct problem, and in Enterprise’s new-build subdivisions it often traces back to crushed flex runs, disconnected joints behind drywall, or a return that was never properly sealed. We repair damaged ductwork rather than just cleaning around it, so you don’t need to hire a second contractor once the problem is found. Our technicians have up to 8 years of experience, we use Rotobrush rotary-brush equipment and Nikro HEPA-rated vacuums on every job, and we deploy Abatement Technologies air scrubbers to keep particulate contained while we work. Same-day repair is available in Enterprise. Call (855) 684-4882.
HVAC Duct Installation
HVAC Duct Installation is the full build-out of a duct system for a new addition, a converted garage, a room that was never tied into the central system, or a home where the existing layout simply can’t be saved. You need it when a space has no supply or return, when a remodel moves walls the old ducts ran through, or when a previous install left the system too restricted to balance. We design the run around the equipment you have, size it to the room load, and seal every joint before the drywall goes back. Duct Cleaning Enterprise handles the whole install with professional-grade tools and verifies airflow at the registers before we call it done. Typical HVAC duct installation in Enterprise runs $1,200 to $3,800 for a single zone, and the written estimate sets the final price.
Load and Layout Planning
We map supply and return locations against how the room actually gets used, so the airflow lands where people sit and sleep rather than against a wall. Duct sizing follows the equipment’s capacity, not a guess at what fits. Getting this right up front is what keeps a new run from starving the rest of the house.
Sealing and Pressure Testing
Every joint, collar and boot gets sealed before we close anything up, then we check static pressure at the air handler to confirm the new run isn’t choking the system. Abatement Technologies scrubbers stay running through the cut-in so drywall dust and insulation fibers don’t spread through the house. You get a system that’s quiet at the register and balanced across the rooms.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Air Duct Replacement
Air Duct Replacement means pulling out ductwork that has reached the end of its useful life and putting new runs in its place, rather than patching a system that keeps failing in new spots. It’s the right call when flex duct has collapsed or torn in multiple places, when rodent or pest damage has compromised the interior lining, or when an older rigid system has so many taped-over patches that sealing it again won’t hold. We assess the full run, tell you honestly whether repair or replacement makes more sense, and if it’s replacement we remove the old material, clean the cavity, and install new insulated duct sized to your air handler. Duct Cleaning Enterprise uses Rotobrush and Nikro equipment to clear debris before the new runs go in, so you’re not sealing dirt into a fresh system. Air duct replacement in Enterprise typically runs $1,400 to $4,200 depending on run length and accessibility. The written estimate sets the final price.
What Gets Evaluated First
We inspect the duct interior with a camera, check the lining for tears and contamination, and measure static pressure before recommending replacement. If a handful of joints can be sealed and the system recovers, we’ll say so. Replacement gets proposed when the damage is widespread or the material itself has failed.
Access and Disruption
Attic and crawlspace access drives how long a replacement takes and what it costs, and we walk you through the access points before work starts. Containment stays up the whole time so insulation and debris don’t migrate into living space. You know what’s coming out and what’s going in before we begin.
Ductwork Repair
Ductwork Repair covers the targeted fixes that bring a damaged system back to working order without a full replacement: reconnecting a separated joint, sealing a crushed flex run, replacing a torn boot at the register, or repairing a section of rigid duct that’s come apart. You need it when one or two rooms won’t heat or cool, when you hear whistling or rattling behind the drywall, or when a utility bill jumps without any change in how you run the system. We locate the failure, confirm it with airflow readings, and fix the specific section rather than selling you a whole new system. Duct Cleaning Enterprise uses Nikro HEPA vacuums to pull loose debris from the repaired section and Abatement Technologies scrubbers to keep the work area clean, then we verify airflow at the register before we leave. Ductwork repair in Enterprise runs $250 to $900 for most single-section fixes. The written estimate sets the final price.
Locating the Failure
We start at the register and work back toward the air handler, checking static pressure and using a camera where the run is hidden. Most airflow problems trace to one or two points, not the entire system. Finding the actual failure is what keeps the repair small.
Sealing It Properly
Mastic and mesh tape go on the joints that matter, not just a wrap of duct tape that fails within a season. Where a flex run has collapsed, the section gets replaced rather than stretched back into place. The repair holds through Enterprise’s summer temperature swings, which is the test that matters.
Duct Replacement
Duct Replacement is the swap-out of a failed duct component or an entire run when the material no longer holds air, and it’s the option we reach for when a system has been patched repeatedly and still leaks. You need it when flex duct has been crushed past the point of recovery, when the interior lining has torn loose, or when pest damage has left a run that can’t be cleaned to a safe standard. We remove the compromised section, install new insulated duct matched to the existing system, and pressure-check the result so the replacement doesn’t just move the leak downstream. Duct Cleaning Enterprise confirms the fix with airflow measurement at the registers before we wrap up. Duct replacement in Enterprise typically runs $600 to $2,400 per run, depending on length and how much attic or crawlspace access the job requires. The written estimate sets the final price.
Matching the Existing System
New duct has to match the air handler’s capacity and the trunk it ties into, or the replacement creates an imbalance somewhere else. We measure before we order material. The goal is a run that behaves like the rest of the system, not just a new-looking section.
Verifying the Result
Once the new run is in, we read airflow at the register and confirm it lands where the design intended. Any gap between the new section and the trunk gets sealed with mastic, not tape. You’ll feel the difference at the vent before we pack up.
Ductwork Installation
Ductwork Installation is putting a duct system in place from scratch, whether that’s a first-time system for a space that never had one or a rebuild where the old layout has to come out entirely. It applies to converted spaces, additions, and homes where the previous install was done so badly that starting over is cheaper than chasing repairs. We plan the layout, cut in the registers, run and seal the duct, and test the system before the job closes. Duct Cleaning Enterprise works with Honeywell and Aprilaire air-quality products on these jobs, so filtration and humidification tie into the new ductwork correctly rather than fighting it. Ductwork installation in Enterprise runs $1,200 to $3,800 for a typical single-zone layout. The written estimate sets the final price.
Tying in Air Quality Equipment
When a home has a Honeywell or Aprilaire filter cabinet or humidifier, the new ductwork has to route around it without starving the airflow. We plan those tie-ins during layout, not after the drywall is up. That’s the difference between a system that filters properly and one that whistles.
Testing Before Close-Up
Static pressure gets checked before the last piece of duct is sealed, so a restriction is caught while it’s still cheap to fix. Registers are balanced across the rooms the system serves. The install is finished when the airflow numbers say it is, not when the last screw goes in.
Brands We Service
We service Rotobrush rotary-brush equipment and know how its brush heads wear against different duct linings, which matters when you’re cleaning flex duct without tearing the interior. Our work with Nikro HEPA-rated vacuums means we understand where those systems lose suction and when a filter needs replacing mid-job. Both are professional-grade tools, not consumer equipment, and they’re the standard we hold our duct work to.
On the air-quality side, we work with Honeywell and Aprilaire products and know how those filter cabinets and humidifiers tie into a duct system. We’re not a dealer for any of them, but we know where each wears out and what a failing component looks like inside the duct. Whether you have Rotobrush, Nikro, Honeywell, Aprilaire, Guardsman, or any other make, we can help.
For cleaning before or after a repair, see our duct cleaning Enterprise service, and for dryer vent work in the same visit, our Henderson page covers what’s involved.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- One room won’t heat or cool. A single room that stays off-temperature while the rest of the house is fine usually means a separated joint or crushed run to that space. The system is working harder to push air that never arrives.
- Whistling or rattling at a register. A whistle means a restriction or a loose boot at the vent; a rattle often means a duct has come loose from its hanger. Both wear on the system every time it cycles.
- Visible dust at the vent or streaks on the ceiling. Dust blowing back into a room or a streak mark near a supply often points to a leak in the duct run behind the drywall. It gets worse with every season of use.
- A jump in the energy bill with no other change. Leaking ducts pull conditioned air into the attic, and the system runs longer to compensate. In Enterprise’s summer heat, that cost shows up fast.
- Pest damage or debris in a duct run. Rodent damage to flex duct is common in desert neighborhoods, and it leaves a run that can’t be cleaned to a safe standard. That calls for repair or replacement, not another cleaning.
Our Process, Step by Step
- 1
Diagnostic visit and airflow check. We start at the air handler and work outward, reading static pressure and checking each register to find where the system is losing air. A camera goes into the runs that are hidden behind drywall or insulation.
- 2
Containment setup. Before any cutting or cleaning, Abatement Technologies air scrubbers go up to hold particulate in the work area. This is a standard step on every job, not an upgrade.
- 3
Cleaning and debris removal. Nikro HEPA-rated vacuums pull loose debris from the affected runs, and Rotobrush rotary brushes clear the duct interior where cleaning is needed ahead of a repair. We don’t repair over dirt.
- 4
The repair itself. We replace or reconnect the failed section, seal joints with mastic and mesh tape, and match new duct to the existing system. You see before-and-after photos of the ductwork we touched.
- 5
Verification and walkthrough. Airflow is measured again at the registers to confirm the fix held, and we walk you through what we found and what we did. The written estimate matches the final invoice.
How Much Does Air Duct Repair Cost in Enterprise?
Air duct repair in Enterprise typically costs $250 to $900 for a single-section fix, and most jobs land in that range. A typical ductwork repair in Enterprise runs $250-$900 depending on how hard the failed section is to reach and whether the duct interior needs cleaning first. A typical duct replacement runs $600-$2,400 per run, driven by length and attic or crawlspace access. A full air duct replacement across the system runs $1,400-$4,200, and HVAC duct installation for a new zone runs $1,200-$3,800. All of these are estimated ranges; the written estimate sets the final price.
What affects the price most: access (a run buried under insulation in a tight attic adds labor), material (flex versus rigid, and whether the lining has to match an existing spec), and scope (one joint versus a whole run). A separate cleaning before a repair adds to the job but is often necessary so the new section isn’t sealed over debris.
How to avoid overpaying: get the scope in writing before work starts, ask whether the failed section can be repaired rather than replaced, and be wary of a quote that lumps everything into one number without explaining what’s being fixed. One flat price per job, agreed before work starts, is how we work, and you see before-and-after photos of your own ducts.
What’s included in a free estimate: the diagnostic visit, airflow readings, a camera check where needed, and a written scope with the price. Call (855) 684-4882 for an exact quote. Estimates are free.
Our Service Area Near Enterprise
We serve Enterprise and the surrounding valley, including Spring Valley, Paradise, Sunrise Manor, Las Vegas, North Las Vegas, and out toward Sandy Valley and Mount Charleston. Response times vary by distance and how the day is scheduled, and we’ll give you a realistic window when you call rather than a guess. Homeowners in Enterprise and Boulder City both sit in our regular coverage, and we schedule Sunday through Friday, 7am to 7pm, closed Saturday.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Air Duct Repair in Enterprise
Air duct repair is fixing damaged ductwork so the system holds air and delivers it where it should, rather than cleaning around a problem. It covers reconnecting separated joints, sealing leaks, replacing crushed or torn flex runs, and repairing rigid duct that’s come apart. If the damage is widespread, we’ll tell you whether replacement makes more sense. Call (855) 684-4882 for an exact quote. Estimates are free.
Most single-section repairs take two to four hours on site, including setup, containment, the repair, and airflow verification. A full duct replacement or a new installation takes longer, often a full day, depending on access and how much duct is involved. We give you a realistic time window when we book the job, not a promise we can’t keep.
Most air duct repair in Enterprise runs $250 to $900 for a single-section fix, with duct replacement at $600 to $2,400 per run and full system replacement at $1,400 to $4,200. Access, material, and scope drive the range. The written estimate sets the final price, and it’s one flat price per job, agreed before work starts. Call (855) 684-4882 for an exact quote. Estimates are free.
Yes, we work with Rotobrush and Nikro cleaning systems and with Honeywell and Aprilaire air-quality products. We know how those components wear and how they tie into the duct system. Whether you have those brands or any other make, we can help.
Same-day repair is available in Enterprise depending on scheduling. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the work we do, and the warranty terms are spelled out in your written estimate before any work starts. What’s covered and for how long depends on the repair, so we put it in writing rather than leaving it vague. Ask about it when you get the estimate.
Clear access to the air handler and to any attic or crawlspace hatch, and move anything stored near the registers you want looked at. If you can, note which rooms won’t heat or cool so we know where to start. That’s it; we handle containment and cleanup.
Schedule Your Air Duct Repair Service in Enterprise Today
If your system is losing air, whistling at a vent, or leaving a room cold while the rest of the house is fine, call (855) 684-4882. We’ll diagnose the ductwork, give you a written estimate with one flat price per job before work starts, and send before-and-after photos when it’s done. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Duct Cleaning Enterprise.